Jwell Plastic Recycling LDPE MDPE HDPE Water Supply Drainage Pipeno-Dust Cutting Environment Friendly Plastic Machine Making Machine

Jwell Plastic Recycling LDPE MDPE HDPE Water Supply Drainage Pipeno-Dust Cutting Environment Friendly Plastic Machine Making Machine

Jwell CZPT Recycling LDPE/MDPE/HDPE Water CZPT Drainage PipeNo-Dust Slicing CZPT CZPTly CZPT CZPT/Creating CZPT
This manufacturing line adopts the most advanced technology of CZPTe,it is a new investigation achievement of energy-preserving generation line,which is suited for large velocity extrusion of HDPE,PP and other polyolefin pipe.in contrast with typical manufacturing line,the strength-conserving result attain on 35%, and the item effectiveness improve much more than 1 instances, hence it is not only preserving the expense of web site and manpower,but also enhancing efficiency.This generation line has wonderful appearance,increased automatical degree ,creation reputable and stable.

This image is just for reference. 

  This extruder is utilised for PE450-800 pipe extrusion line. It is made up of screw, barrel, gearbox and driving motor. The diameter of the screw is 150mm. It is created of 38CrMoAlA and adopts the treatment method of Nitrided. The barrel is manufactured of 38CrMoAlA. Like the screw, it is Nitrided treatment. The barrel has six heating handle zones. The entire heating electricity of it is 90kw. Its cooling program is brower supporter and the cooling electrical power is six.6kw. The matrial of the house is QT200. The sort of the equipment is Helical gears and the content is 20CrMnTi. It employs the Quenching of the gear surface area. Bearings are Chinese CZPT bearings. Its lubricating system is push system. At the exact same time, its cooling program is separate. The technique of the feeding block is water cycle. The substance is Q235. Then it is an DC motor. The energy of it is 355kw. 

  The 25/twenty five single screw extruder is for coloration strip. The diameter of its screw is 25mm. It is Nitrided treatment. The material of the barrel is 38CrMoAlA. It has two heating handle zones. Every single heating energy is one.8kw. The parts of this type of gearbox is as the exact same as the gearbox in the extruder. But Lubricating system is Splashing program. Also its feeding block is like the feeding block in extruder. It has an AC motor with the power of 1.5KW.


This picture is just for reference. 

The mould is spiral variety. Its mouth die and main die are changeable. It possess 31 heating handle zones. The heating energy will up to max 174kw. The calibration unit is high-high quality with resistance copper. The vacuum pump is 5.5kw and the h2o pump is 7.5kw.  It is five.eight meters prolonged. And the stoke is 500mm.

This photo is just for reference.
The cooling tank is stainless steel. The approach of the cooling tank is spraying. And every single established water pump is seven.5kw. The length of it is also one.5m.

This picture is just for reference. 

This haul-off device with pneumatic pressing is utilised for PE450-800pipe extrusion line. The method of this haul-off unit having six caterpillars is rubber block caterpillar. The size of the caterpillar is 2000mm. It uses  AC motors with .55kw of each.  


This photo is just for reference. 

This cutter is utilised for PE450-800 pipe extrusion line. It is no dust slicing with pneumatic urgent. The relocating strategy of the platform is also a pneumatic way. This cutter is suited for the pipes with diameter ranged from 450-800. The motor of this cutter is 4kw. 


  • CZPT bundle for Jwell plastic profile sheet extrusion equipment for PVC.
  • Jwell makes a lot more than 2000 sets of extrusion machines each 12 months, which has been offered to all in excess of the world, including CZPTica, Brazil, Japan, Korea, India, Germany, Turnkey, Malaysia.and so forth.


Quick Infomation of JWELL CZPT CO., LTD

  • The largest plastic extrusion producer in China with 18 skilled subsidiaries, nine massive metallic-doing work workshops and four huge warmth-treatment method nitration workshops.
  • Founded in ZheJiang , China 1997,has designed into five generation bases including ZheJiang , HangZhou, HangZhou, HangZhou and HangZhou with far more than 1000mu location.
  • JWELL CZPT (HangZhou) CO., LTD. is yet another growth strategy centre of ZheJiang JWELL CZPTry Co.,ltd, locating at CZPTsu Zhongguan cun engineering industrial park, CZPT town, CZPTsu province.
  • We have a high qualified R&D and seasoned mechanical and electrical engineer crew as well as innovative processing basis and normative assembly shop.

Jwell Society:

  • Jwell CZPT Spirit: Attentive,Edurung,Fast and Orderly    
  • Jwell CZPT CZPTation:Exceptional efficiency, Ideal CZPT
  • Core Thought:Be truthful to folks,Be faithful to Jwell.


Jwell Plastic Recycling LDPE MDPE HDPE Water Supply Drainage Pipeno-Dust Cutting Environment Friendly Plastic Machine Making Machine