Firm profile:
Item introduction:
Product LJYA slurry pump is single-phase one-suction vertical overhung centrifugal submersible pump. Its impeller is semi-open up variety. There are impeller addresses in entrance of the impeller and driving the impeller. It is widely employed in chemical procedure to pump abrasive & corrosive fluid medium with strong material <30% and viscosity <200CP. It is especially suitable to pump phosphoric acid and phospHangZhoudon in phosphate fertilizer.
The temperature of pumped fluid medium <110ºC. If the temperature of fluid medium is higher, use cooling water to cool shaft.
Software fields:
FJYA pump is primarily employed to pump all kinds of reliable particle contained neutral or sturdy corrosive medium. Primarily utilised in industries of oil refinery, petrochemical engineering, lower temperature engineering, coal chemical business, chemical fiber, and basic industrial process, electricity plant, environmental protection engineering, maritime industry, sea h2o desalination phosphoric acid, ammonium phosphate.
Normal:
API610
Parameter selection:
| Potential | 10~400m3/h |
| Head | ~50m |
| Functioning strain | 2.5MPa |
| Working temperature | -forty~150ºC |
Business certification:
ISO14001:2005 BSOHSAS18001:2007 ISO9001:2005
FAQ:
1.CZPTion: How about shipping and delivery time?
Answer: It normally takes about 30 times for manufacturing.
two.CZPTion: What is actually your payment phrase?
Answer: thirty% T/T in advance, 70% compensated before shipping and delivery.
L/C at sight
CZPT CZPT
3.CZPTion: What’s the predicted service lifestyle of your pump?
Answer: five many years underneath excellent condition and routine maintenance. We give one 12 months promise for the pump.
four.CZPTion: What components of pumps you can create?
Answer: We can use components this sort of as Ni-Tough alloy, 1Cr18Ni9Ti, 304L, CW-two, 316L, 904L, CD4MCu, MM-four, 2507, double-section metal sequence, J-one alloy, JM3, JM6, Kazak B, C alloy, Monel alloy, Ti, Ni alloy.
Contact info: