Fuel Oil Sliding Vane Suction Truck Pump

Fuel Oil Sliding Vane Suction Truck Pump

Principal Characteristics

YB series self-priming rotary vane pump is with by-pass valve built-in. The pump makes use of a rotor with sliding vanes to generate the liquid transfer. The material of building is nodular cast iron with self-lubricating vanes. Owing to its superior performance, the pump can take care of viscous and unstable liquid and require much less horsepower than other equal pumps. The pump has its obvious edge in the transmission of large stream at lower revolution.
Oil tank truck
Fleet refueling.
Lube oil
Aviation refuelers
Transmission of petrochemicals, gasoline, diesel, biofuel, solvent, etc.

Set up

With cardan shaft or hydraulic motor, the pump can be put in on oil tank vehicles. And also it can be installed on metal baseplates with motor or diesel engine, making use of for high flow fuel dispensers and floating fuel equipments which are compose of pumps and flowmeters. Geared up with Teflon seals, the pump can also transfer a broad range of solvent in the petrochemical sector.

Model Size/Movement Fee/Speed 650 RPM 600RPM 550 RPM 500 RPM 450 RPM 400 RPM
G/min L/min G/min L/min G/min L/min G/min L/min G/min L/min G/min L/min
YB-fifty 50mm/2” eighty 300 seventy two 270 sixty four 240 fifty six 210 forty eight one hundred eighty 40 one hundred fifty
YB-65 65mm/two.5” 132 500 123 465 114 430 103 390 ninety three 350 eighty two 310
YB-80 80mm/3” 265 a thousand 243 920 222 840 200 760 180 680 160 600
YB-100 100mm/4”             505 1900     405 1530

Functionality Data

Product YB-fifty YB-sixty five YB-80 YB-a hundred
Rated Velocity 640RPM 640RPM 640RPM 640RPM
Electrical power HP three. 5. 10 25
KW 2.2 4 7.five 18.5

Fuel Oil Sliding Vane Suction Truck Pump