Variety Xihu (West Lake) Dis.

CZPTest place

• DC pump with wave manner
• Different handle
• Silent
• Lower use
• Tiny entire body with large flow
• Large strain
• Three years Guarantee

Features

• With three modes:Constant flow rate Mode (20 Levels) ,Wave Manner and Feed Mode, the output electricity could be adjusted to match distinct dimensions of fish tank.

• Use 6-Pole CZPT DC a few-stage driver (with out sensor),

• Reduced voltage(DC24V) procedure ,Protected, Long lifestyle expectancy and minimal sound.

• With Ceramic shaft & carbon fiber shaft sleeve to make confident the motor’s prolonged expectancy.

• The input voltage if adapter is commonly from AC100 to AC240V/60Hz) which can be suitable for a lot of international locations

• Ideal for both new h2o and Salt h2o

5 CZPT Operate
1.Dry running security
two.Locking protection
3.Above voltage protection
four.Low voltage security
5.Overloading defense

Instruction for Use
1. Steady circulation fee Method (twenty Amounts)
The pump will operate in this method (method one) when powered on. You can adjust the pace by the key of “Pace”. When the indicator screen demonstrates the quantity “101”, that means you have chosen the most affordable movement at method one, when the indicator screen demonstrates the amount “one hundred twenty”, that means highest movement rate at mode 1.

2. Wave making Method (20 Ranges)
Prior to function in wave creating method (manner two), you ought to change the velocity of mode one into a lower amount (the water just appear out from the pipe on the best tank slowly), for the regular fish tank the appropriate pace is 02, the indicator display screen exhibits “102”. And then alter into wave generating manner (by press the essential of “Method”), the indicator screen will exhibits “202” (that implies level 2 at mode 2), then press the essential “speed” to change the wavelength.

three. Feed Mode
Push the essential “Feed” until the indicator display screen demonstrates the number “410”. When the number “410” comes out, that implies you have picked Feed manner successfully. And then the pump will cease working for your feeding fishes. Meantime, the indicator monitor starts the countdown when it exhibits the number “forty nine”. The countdown is ten minutes. When the monitor shows the variety “40”, that signifies the countdown is above and the pump will restart to perform.

Servicing
1. Please thoroughly clean the wave pump regularly to ensure their performance.
2. If there have water on the surface of the controller, make sure you wipe with dry cloth to prevent drinking water from coming into the handle box.
three. When the pump cease functioning, very first check out the electricity adapter, then eliminate the foot of pump, open up the pump lid by counterclockwise rotation, then cleanse the inner aspect of the pump.
four. This item is used in indoor, will not allow the controller and adapter drop into the water so as to trigger unnecessary losses.

Observe
1. Dry managing is not authorized in buy to ensure the product efficiency.
two. Hold the controller and adapter away from water and h2o splash.
three. To steer clear of damage remember to don’t open the controller and adapter.